You will need a pair of scissors, some masking tape & a Squeegee (a credit card is fine)

Step 1: Ensure surface is clean and free from grease and oil,

Cut decal to size and position, Put a strip of masking tape on

the top edge of decal creating a flap

If Applying a long or large decal cut up to the masking tape making

easier to manage sections,

Step 2: Carefully remove backing making sure the decal does not touch down,

Now you will need your squeegee or plastic credit style card,

Step 3: Whilst holding decal proud from surface firmly draw squeegee

from top to bottom of decal and then out to each side,

Continue along decal until all sections are firmly applied,

Step 4: Gently but firmly remove the application tape at approximately

10 degrees from the surface,

Congratulations job complete!